MARCH 24, 2008
|
|
|
|
|
|
|
The Solo Sag Scale from ASV Inventions |
The Product: ASV Inventions Solo Sag Scale
The Weapon: 2008 Honda CRF450R
Cost: $125 USD
Online: www.phatmx.com
The creative minds behind ASV Inventions are proud to introduce another innovative product: The ASV Solo Sag Scale. This CNC machined scale fits snugly between the axle and rear fender to display accurate race and static sag readings, without recording numbers or bugging a buddy for assistance.
Track Tested:
Fortunately, we didn’t need to use a track for this test, which, although not eliminating, greatly reduced the chances of “Giver” destroying something of Rob’s. Once reading the instructions, the ASV Solo Sag Scale is very easy to use. For rider sag, insert the tapered rubber plug on the bottom of the scale into your axle and mount the top clamp to your rear fender. Then, fully dressed, sit on your bike with your feet in front of the footpegs. While keeping your full weight on the bike, reach back with your left hand and slide the “solo” bar down until it stops. Now, climb off your bike, set it on the stand with the rear suspension fully extended, and read the measurement.
To measure static sag (no rider), attach the scale as explained above with the bike on a stand, then place the bike on the ground, clock the “solo” bar again, and then place the bike back onto the stand. Your static sag is now recorded. This number lets you know if you have the correct spring rate.
We tested the ASV Sag Scale on our Honda CRF450 before riding at the NEMX indoor track in Andover, Ohio. Rob and I had previously checked his sag using the old tried and true method involving a tape measure and subtraction just to be sure we had a correct reading. As expected, we followed ASV’s directions and in less than a minute had identical measurements.
|
|
|
Our product consultant Rob McCullough admires his ASV levers, as we snap this beautiful shot of the ASV Scale in use. Excellent composure, DB! |
Verdict:
The ASV Solo Sag Scale is a practical and useful tool from the gang at ASV Inventions. As the name suggest—no outside assistance is required; it’s easy to use, durable, when not in use compresses down to 15 inches and comes with a heavy duty, plastic case that fits nicely in your toolbox. While it isn’t the least expensive option out there, it’s without question the most user friendly and definitely worth the price.
